VESDA Maximum Height
Is there a maximum height at which horizontally arranged VESDA tubes can be installed I have come across a 14m high installation in a very high value 4000m2 vehicle storage garage/warehouse. The VESDA...
View ArticleTransient missing device
Morning folks, I have a notifier id3000 reporting transient missing faults. When checking the devices the system reports values to each of the devices reported. I have checked the area and there seems...
View ArticleIonisation Heads Disposal
Hi folks, Any of you good folks know where or who takes Old Ionisation Detectors for disposal with a paper trail for WEEE regs.
View ArticleClik here to view.
Siemens AOV system
Hi Does anyone have any info on a Siemen AOV system, it looks like all 4 zones are set to "no smokes" but there are smoke detectors fitted which obviously don't active the system. controls.jpg (Size:...
View Article2 Wire ADT Sounder.
Morning, We are looking for a 2 wire ADT sounder to add to our existing system. Has anyone got one please, or know where I can locate one. Thanks.
View ArticleGarog mk6 fire door interfac
Anyone have any manuals for garog mk6 fire door interface?
View ArticleHi Resistance on loop
Hi all , having a problem with an advanced mx 4000 panel, 10 nodes on system with 4 loops on each panel. Have been servicing system for 6 months now (did not install it) no major issues to this point....
View ArticleTann synchronome 5401 smoke
Anyone got a manual for these dinosaurs? I want to know what resistance they give out in fire alarm, normal etc...
View Articleprotec cirrus pro 100 software
anyone got the software? or do we have to bow down to the great god of protec?!?!?!?!?
View ArticleNotifier Battery Calculation Program
Hey Folks, I want to (Sad Man that I am) check the Battery Capacity of a project which My client will be quoting for the extension, and although there is lots of paperwork on the existing kit, which is...
View ArticleApollo Wireless
I'm on the scrounge , does anyone have any Expander Optical with Sounder bases , we need them for a job.
View ArticleChubb panels, late 1980s
What panels would Chubb have been fitting in the late 1980s? Around four zones
View Articlevesda question
we have a site with 2 vesda's 1 - 1 pipe covering comms room gnd flr with 1 sample hole in the floor void at pipe end, going through an UNPROTECTED RISER and back into the roof void of the same area...
View ArticleMorley DX Config tool version 2.03b.
Morning team! Just wondering if anyone has a copy of DX Config tool version 2.03b at all? Swapping out an old Morley dimension next week and need to get a download tomorrow. Any help would be greatly...
View ArticleClarkson Sprinkler Controller
Does anyone know where I can purchase or have a data sheet the following :- Clarkson ST3 1289 intelligent sprinkler controller Its XP95 protocol non latching delayed input I have spoken to Clarkson...
View ArticleClik here to view.
Notifier Conventional Panels
Gents Help please Some doufus in my company has decided to install Notifier Conventional Panels, which I have no issue but I do not have any battery calcs for these panels and cannot find anywhere...
View ArticleADT & Cortech Graphics
Has anyone any experience of the Cortech system which is a PC based currently linked to ADT panel but I don't think its a ADT product
View Articleearth fault only occurs whilst testing devices?
interesting one which we fixed by changing an s90 apollo smoke for an xp95 apollo smoke in the end but i am at a loss to explain it: advanced 1 loop panel using apollo xp95 devices. earth fault only...
View ArticleMeaning of the maximum surveillance area of a smoke detector (A max)
Hello, What is the meaning of the maximum surveillance area of a smoke detector (A max) as it is defined in CEA 4040? In Table 2 there are 2 possible values of Amax, but in Figure 7, there are many...
View ArticleAdvanced mx4000 networking
Hi all, does anyone know if advanced mx4000 panels networked together supports global output disablements, on site I have 11 nodes and if I disable all outputs on ,for example on node 1, only outputs...
View Article