Sounders with a bell tone
Hi all not been on here for a bit. Has any body come across sounders that have a bell tone before? We have a tender to complete and in the scope there is a system on one floor which is to remain which...
View ArticleMZX Control panel systems
Hi All, I have been asked by 2 large clients if we will maintain the fire alarm systems. The systems on both sites have MZX technology Panels are both addressable MX250 control panel range with MZX...
View ArticleChubb controlmaster110 codes
Hi, does anyone know the default codes for these rebadged kentecs? Why you need an engineer code to check an event log is anyone's guess... Send a pm obviously, no codes in public forum
View ArticleLinking Conventional Panels
Hi Guys I was looking for some expert advise, I have been asked to look at linking about 6 conventional panels together. Below is what the client requests. The conventional panels are old 2 zone...
View ArticleCI1145-4 panel
hi every body, i want to control and shutdown a fan with CI1145-4 Panel(made by siemens) when a fire exist,how can i do it? is it DC1154 card or E3G070 module compatible with that panel? many thanks.
View ArticleUnexplained False Alarms
Hi Guys I have a system with a duo-cel 8 zone conventional panel and gent 7800 type optical smoke detectors. The zone in the warehouse over the last couple of months has had some false alarms on...
View ArticleClik here to view.
Gent Vigi EN54 - Onboard Sounder Outputs
a quicky ... I'm going to fit an additional fire alarm beacon for a client next week, they have 3 Vigi en54's networked. I no longer have a laptop with a gent licence, so I was going to fit a...
View Articlenew vesda.
anyone used the new vesdas designed for dirty industrial areas? i ve got one to possibly price for but would like some feedback about it if anyone has used them. cheers
View ArticleAFA Minerva 1700
Anyone got much information on these? I seem to remember that S65's work on it but can't remember if head removal is supported?? The panel is older than me though so any info would be appreciated
View Articlectec xfp
came across an unusual one last night called out to a fire alarm in fire. when i got there the panel was powered down by one of the tenants in the apartment block as he said he could not silence the...
View ArticleZiton ZP3 message on screen
Have a Ziton ZP3 with a permanent message on screen "Other: Nothing to Display", this is also on repeater panel, no faults on panel but going into the menu and reset is a bit slower to react. Created...
View Articlemorley zx5 psu problems
New morley zx5se giving psu faults, charger and earth, have replaced some already with similar, does anyone know of anything similar. Thanks
View ArticleClik here to view.
Gent 7800/17801 Bases
Hi, I'm after the wiring connections for this base if anyone can help please?
View ArticleAdvanced MX4402 commissioning problem
Hi, I was wandering if anybody can help me on this one. I have replaced an existing conventional panel with an advanced mx4402. . We have added additional devices and and replaced all of the others...
View ArticleAP 9000 ????
Hi Chaps, Has anyone heard of an addressable panel named "AP 9000"? Running apollo S90's Cheers
View ArticleMenvier sensor head change policy
I've recently been browsing through the CF3000 manual and noticed a paragraph that concerns me slightly. There is a section headed 'Maintenance' which details the usual daily, weekly quarterly etcetera...
View ArticleFireclass Duo CEL
Anyone use these? Any good? We need a back up panel as Kentec Sigma won't work with all detectors.
View ArticleMorley ZX2se missing MCP
Had a job to day to replace a loop card on this panel which had been ordered by another engineer. Panel running Morley IAS devices. The fault was panel showing missing 3 MCP's. The MCP's operated...
View ArticleXP 95 Disconnected fault
Got a site with a few xp95 heads now and again panel will show disconnected faults for a random device - usually i find warped bases to be the problem on but can only clear the fault with a new device....
View ArticleJSB firedex 3302/ECO
hey guys, we've inherited a site with one of the above panels. the sounder circuits on the panel appear to be blown so needs a new panel. the detectors are ECO2003 range. just wandering if there are...
View Article